Recommended products (Seguno)

Replaces Z-406, B-12, B-14, SR-12 Used as a transom anode on many yachts.  For use in all types of water:salt, brackish and freshwater.  Weight:...

Honda BF 75-225HP (since 1999) - Honda Engine Anodes - Length: 2.76” Width: 1.38” Thickness: .67” (.43” smaller side’s height) - Weight: .496 lbs...

Yamaha Transom Aluminum Anode 6G5-45251-01 Yamaha                                                                                        Outboards  Stainless Steel Outboard Length: 8” Width: 2” Mounting Holes: 0.5” x 0.25” Fits the following Yamaha outboard models:...

Made by Zimar Diameter: 6 inches Height: 5.75 inches Weight: 28.60

Line, net, and weed cutter. Keep your engine safe with SPURS line cutters. We provide the zinc to protect the propellors in your motor...

Honda BF 75-130Hp - Honda Engine Anodes - 41107-ZW1-B01-ZA Honda Outboard Trim Tab Zinc Anode Diameter:  4-1/2" Height:  2-1/2"Hole Diameter:  3/8"Weight:  0.9 lbs

Diameter: 1 1/4" Height: 3/4" Weight: 0.22 lbs USED FOR: SEA REX All Zimar plate zinc anodes are cut as per dimensions . These...

Diameter: 2" Length : 24"  Weight: 20.60 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...

Length: 14" Weight: 9.20 lbs Center to Center: 8" All Zimar plate zinc anodes are cut with specified bolt patterns as per dimensions ....

Length: 1" Weight: 6.80 lbs Center to Center: 5" All Zimar plate zinc anodes are cut with specified bolt patterns as per dimensions ....

Length: 12" 1/8 Weight: 6" Thickness: 1" Weight: 18.2 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat...

Length: 12"Width: 6"Thickness: 1/2"Weight: 8.80 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled for bolt-on...

Length: 8 5/8" Width: 3 1/4" Thickness: 1 5/8" Weight: 4.05 lbs All plate zinc anodes are cut as per dimensions . These Zimar...

Length: 9" Width: 3 3/8" Thickness: 7/8" Weight: 4.00 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat...

Length: 3 1/4" Width: 2 3/4" Thickness: 1/2" Weight: 1.06 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate...

Length: 11" Width: 3 1/2" Thickness: 1 9/16" Weight: 11.00 lbs OL: 14 3/4" These Zimar plate zinc anodes are cut as per dimensions...

Length: 18" Width: 4" Thickness: 1 3/8" Weight: 18.00 lbs Center to Center: 7 1/4 - 9 1/4" Used in Sealine Yachts. All Zimar...

Height: 3 1/2" Diameter: 2 5/16" Weight: 2.50 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over...

DIAMETER: 70mm Weight: 9.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

Diameter: 5" Weight: 23.00lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion. All...

Diameter: 3/4" Weight: 1.30 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....

Diameter: 1 3/8" Weight: 1.75 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...

Kit for 185mm diamter tunnel thruster

Zinc Anodes for MaxPro Propellers used in Salt and Brackish waters. Fits 2001 and older 63mm hubs non-circular in diameter. For 3/4” to 1...

Zinc with Brass Cap Diameter: 3/4" Length: 3 3/8" NPT: 3/4 Wrench: 1 1/16"

PROP NUT Weight:  12lbs Inside Height: 60mm I/D:  85mmO/D:  120mm

Yamaha Trim Tab Anode 6K1-45371-00 Yamaha 90-200 HP Outboard Trim Tab Zinc Anode (LH) Yamaha 90-200HP Diameter: 91mm Base Diameter:  3-5/8" Threaded Mounting Hole:  M10 x 1.25mm...

Zinc prevents corrosion on your boat's engines and propellers. Make sure to maintenance your boat every 3 through 6 months.  Requires 4 for each...

Line, net, and weed cutter. Keep your engine safe with SPURS line cutters. We provide the zinc to protect the propellors in your motor...

Honda BF 2-100Hp 1997 & Older - Honda Engine Anodes - Length: 2.36” Width: .91” Thickness: .47” - Weight: .165 lbs 41106-935-812 Honda Outboard...

Center to Center: 1 3/4" Height: 1 3/8" Diameter: 2 5/8" Weight: 1.60 lbs USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER All cone zinc...

Length: 2 5/8" Width: 2 1/4" Weight: 1.00 lbs Center to Center: 2" USED FOR: PERSHING/SEA REX All Zimar plate zinc anodes are cut...