No products in the cart.
Zinc Anodes
All Zimar collar zinc anodes include copper contacts for permanent ground and stainless screws with washer retainers.
Zimar collar zinc anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better.
Zimar collar zincs meet the standards set forth by Mil-Spec A-18001, Mil-Spec A-18001A, and Mil-Spec A-18001K.
Sale
DIAMETER: 35mm Weight: 2.40 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
DIAMETER: 30mm Weight: 1.20 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Diameter: 1 1/8" Weight: 1.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Sale
Yamaha Transom Aluminum Anode 6G5-45251-01 Yamaha Outboards Stainless Steel Outboard Length: 8” Width: 2” Mounting Holes: 0.5” x 0.25” Fits the following Yamaha outboard models:...
Sale
Zinc Anodes for MaxPro Propellers used in Salt and Brackish waters. Fits 2001 and older 63mm hubs non-circular in diameter. For 3/4” to 1...
Sale
Zinc with Brass Cap Diameter: 3/4" Length: 3 3/8" NPT: 3/4 Wrench: 1 1/16"
Sale
Diameter: 1 1/4" Height: 3/4" Weight: 0.22 lbs USED FOR: SEA REX All Zimar plate zinc anodes are cut as per dimensions . These...
Sale
Diameter: 2" Length : 24" Weight: 20.60 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the...
Sale
Length: 14" Weight: 9.20 lbs Center to Center: 8" All Zimar plate zinc anodes are cut with specified bolt patterns as per dimensions ....
Sale
Length: 1" Weight: 6.80 lbs Center to Center: 5" All Zimar plate zinc anodes are cut with specified bolt patterns as per dimensions ....
Sale
Length: 12" 1/8 Weight: 6" Thickness: 1" Weight: 18.2 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat...
Sale
Length: 12"Width: 6"Thickness: 1/2"Weight: 8.80 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat zincs are undrilled for bolt-on...
Sale
Length: 8 5/8" Width: 3 1/4" Thickness: 1 5/8" Weight: 4.05 lbs All plate zinc anodes are cut as per dimensions . These Zimar...
Sale
Length: 9" Width: 3 3/8" Thickness: 7/8" Weight: 4.00 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate boat...
Sale
Length: 3 1/4" Width: 2 3/4" Thickness: 1/2" Weight: 1.06 lbs All plate zinc anodes are cut as per dimensions . These Zimar plate...
Sale
Length: 11" Width: 3 1/2" Thickness: 1 9/16" Weight: 11.00 lbs OL: 14 3/4" These Zimar plate zinc anodes are cut as per dimensions...
Sale
Length: 18" Width: 4" Thickness: 1 3/8" Weight: 18.00 lbs Center to Center: 7 1/4 - 9 1/4" Used in Sealine Yachts. All Zimar...
Sale
Height: 3 1/2" Diameter: 2 5/16" Weight: 2.50 lbs Used in Feretti Yachts. These Zimar nut zinc anodes are precision machined to fit over...
Sale
DIAMETER: 70mm Weight: 9.10 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Diameter: 5" Weight: 23.00lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion. All...
Sale
Diameter: 3/4" Weight: 1.30 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion....
Sale
Diameter: 1 3/8" Weight: 1.75 lbs Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of...
Sale
Zinc prevents corrosion on your boat's engines and propellers. Make sure to maintenance your boat every 3 through 6 months. Requires 4 for each...
Sale
Length: 6 1/4” Width: 5 7/8” Thickness: 1/2” 5 Holes/Mercury Zeus pod trim tab anode
Sale
Yamaha 200-300 HP Outboard Fin/Skeg STANDARD Base Diameter: 4” Threaded Mounting Hole: M10 x 1.25mm 61A-45371-00 Yamaha 200-300 HP Outboard Trim Tab Zinc Anode...
Sale
Length: 2 5/8" Width: 2 1/4" Weight: 1.00 lbs Center to Center: 2" USED FOR: PERSHING/SEA REX All Zimar plate zinc anodes are cut...
Sale
Zinc Anodes for MaxPro Propellers used in Salt and Brackish waters. For 2003 and older 83mm hubs. For 1 1/2”” to 1 3/4”(38mm to...
Sale
Zinc Anodes for MaxPro Propellers used in Salt and Brackish waters. Fits 2001 and older 70mm hubs non-circular in diameter. For 1 1/4” to...
Kamewa Jet Drive Thickness:0.98”
Sale
Center to Center: 1 3/4" Height: 1 3/8" Diameter: 2 5/8" Weight: 1.60 lbs USED FOR: AMERICAN YACHTS BY AMERICAN THRUSTER All cone zinc...
About Us
